Under the other hand, Teana may simply not the case, Turbocharger For Sale transverse engine not only unable to adopt twin-turbo configuration angle header piping design is a big headache in vain Tuner searching through space to install the turbine body, the final decision after shift battery the turbines placed in this, then follow the factory exhaust banana segment, then handmade way around the side of the engine exhaust pipe to the turbine exhaust elongated tortoise entrance, so it smoothly Fengyun T67 25G turbo "hung" up . In addition, Tuner in tortoise shell and Front row on Pipe, but also their special insulation layer coated cloth, hoping to reduce the negative impact of the turbine exhaust temperature of the engine compartment parts.

Exhaust pipe to get there inlet pipe, due to the throttle position to the left of the front in the same turbine, for the air to pass into the intercooler and then into the engine, so the front bumper had applied Tuner space, so that after the first intake tubes front bumper to the right front, entering the cold inside, then reintroduced into the throttle, the engine so that it can provide sufficient cooling air to the combustion use. We will promise to ask: so long to pull the intake and exhaust pipes, turbo lag problem will not be very serious? Aftermarket Auto Parts I also very interested in this issue, but Tuner- A letter is very confident replied: 3.5 displacement turbo Fengyun be very easy to push, boost the value began to turn around 2000rpm positive, so do not Lag worried about the problem.
As for the strengthening of the oil supply system, then the original gasoline pump nozzle and were replaced by Sard 550c.c. Weber 250h / l of modified parts, corresponding to the amount of fuel supply after turbine technology. After the modification of computer parts, after assessment may also need to continue to upgrade, Tuner directly HKS F-Con V Pro 3.2 version modified computer installed, hoped the aircraft powerful plug properly controlled VQ35DE engine turbine, the require adjustment of the correction. Currently set to boost the value of the car at around 0.6bar, estimates should be 350 horsepower, 100 ~ 200km / h definitely want to run into 12 seconds units have a chance! www.maxspeedingrods.com